Lixiviación de calcopirita mecánicamente activada utilizando ácido sulfúrico

Danny Guzmán; Stella Ordoñez; Claudio Aguilar; Paula Rojas; Daniel Serafni; Washington Silva; Claudio Díaz

Lixiviación de calcopirita mecánicamente activada utilizando ácido sulfúrico

Danny Guzmán, Stella Ordoñez, Claudio Aguilar, Paula Rojas, Daniel Serafni, Washington Silva, Claudio Díaz

Universidad Adolfo Ibáñez

Producción científica: Contribución a una revista › Artículo › revisión exhaustiva

2 Citas (Scopus)

Resumen

In order to study the effect of mechanical activation on the sulphuric acid leaching of CuFeS₂, four samples were milled using an Atritor mill during 1, 5, 8, and 15 h. The powders were microstructural and morphologically characterized by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The samples were leached using a solution of H₂SO₄ (0.54 M) at 298 K. The Cu⁺² concentration was determined by means of atomic absorption spectrophotometry. The results obtained indicated that the increase in milling time results in increased recovery of Cu. The maximum recovery of Cu was 38.2 % for a milling time of 15 h.

Título traducido de la contribución	Sulphuric acid leaching of mechanically activated chalcopyrite
Idioma original	Español
Páginas (desde-hasta)	32-39
Número de páginas	8
Publicación	Revista Facultad de Ingenieria
N.º	56
Estado	Publicada - dic. 2010

Palabras clave

Leaching
Mechanical activation
X-ray diffraction

Citar esto

@article{9b6385efc6f441d18b486d65bd30225e,

title = "Lixiviaci{\'o}n de calcopirita mec{\'a}nicamente activada utilizando {\'a}cido sulf{\'u}rico",

abstract = "In order to study the effect of mechanical activation on the sulphuric acid leaching of CuFeS2, four samples were milled using an Atritor mill during 1, 5, 8, and 15 h. The powders were microstructural and morphologically characterized by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The samples were leached using a solution of H2SO4 (0.54 M) at 298 K. The Cu+2 concentration was determined by means of atomic absorption spectrophotometry. The results obtained indicated that the increase in milling time results in increased recovery of Cu. The maximum recovery of Cu was 38.2 % for a milling time of 15 h.",

keywords = "Leaching, Mechanical activation, X-ray diffraction",

author = "Danny Guzm{\'a}n and Stella Ordo{\~n}ez and Claudio Aguilar and Paula Rojas and Daniel Serafni and Washington Silva and Claudio D{\'i}az",

year = "2010",

month = dec,

language = "Spanish",

pages = "32--39",

journal = "Revista Facultad de Ingenieria",

issn = "0120-6230",

publisher = "Universidad de Antioquia",

number = "56",

}

TY - JOUR

T1 - Lixiviación de calcopirita mecánicamente activada utilizando ácido sulfúrico

AU - Guzmán, Danny

AU - Ordoñez, Stella

AU - Aguilar, Claudio

AU - Rojas, Paula

AU - Serafni, Daniel

AU - Silva, Washington

AU - Díaz, Claudio

PY - 2010/12

Y1 - 2010/12

N2 - In order to study the effect of mechanical activation on the sulphuric acid leaching of CuFeS2, four samples were milled using an Atritor mill during 1, 5, 8, and 15 h. The powders were microstructural and morphologically characterized by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The samples were leached using a solution of H2SO4 (0.54 M) at 298 K. The Cu+2 concentration was determined by means of atomic absorption spectrophotometry. The results obtained indicated that the increase in milling time results in increased recovery of Cu. The maximum recovery of Cu was 38.2 % for a milling time of 15 h.

AB - In order to study the effect of mechanical activation on the sulphuric acid leaching of CuFeS2, four samples were milled using an Atritor mill during 1, 5, 8, and 15 h. The powders were microstructural and morphologically characterized by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The samples were leached using a solution of H2SO4 (0.54 M) at 298 K. The Cu+2 concentration was determined by means of atomic absorption spectrophotometry. The results obtained indicated that the increase in milling time results in increased recovery of Cu. The maximum recovery of Cu was 38.2 % for a milling time of 15 h.

KW - Leaching

KW - Mechanical activation

KW - X-ray diffraction

UR - http://www.scopus.com/inward/record.url?scp=78650411028&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:78650411028

SN - 0120-6230

SP - 32

EP - 39

JO - Revista Facultad de Ingenieria

JF - Revista Facultad de Ingenieria

IS - 56

ER -

Lixiviación de calcopirita mecánicamente activada utilizando ácido sulfúrico

Resumen

Palabras clave

Huella

Citar esto